Sign In | Join Free | My
China Dongguan Haida Equipment Co.,LTD logo
Dongguan Haida Equipment Co.,LTD
Dongguan Haida Equipment Co.,LTD Quality Comes From Precision, Quality Creates the Future!
Verified Supplier

7 Years

Home > Vibration Test System >

Electrodynamics Vibration Test System / Vibration Shaker Table High Frequency Vertical And Horizontal

Electrodynamics Vibration Test System / Vibration Shaker Table High Frequency Vertical And Horizontal

Brand Name : HAIDA

Model Number : HD-G826

MOQ : 1 sets

Payment Terms : D/A, L/C, D/P, T/T, Western Union, MoneyGram

Packaging Details : Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside.

Shaker Frequency range : 5~2,600 Hz

Power Amplifier Amplifier output : 30 kVA

Blower Air volume : 0.46 m3/s

Horizontal Slip Table Dimensions : 600x600 mm

Power : Electronic

Usage : Vibration environment simulation test

Contact Now

Electrodynamics Vibration Shaker Table Test Machine High Frequency Vertical And Horizontal


Electromagnetics vibration table is widely used in defense, aviation, aerospace, communications, electronics, automobiles, home appliances, and other industries. This type of equipment is used for discovering the early faults, simulating the actual working condition and the structure strength test, the product application is wide, the application width is obvious, the test effect is remarkable and reliable. Sine wave, FM, sweep, programmable, frequency multiplier, logarithm, maximum acceleration, amplitude modulation, time control, full function computer control, simple fixed acceleration/fixed amplitude. Equipment through continuous failure to run 3 months of testing, stable performance, reliable quality.


Ultra mute work; The machine base uses the high quality material, installs conveniently, the operation is smooth, does not need to install the The, the control circuit digitization control and the display frequency, the PID adjusts the function, causes the equipment work to be more stable, reliable, sweeps the frequency and the fixed frequency operation way, adapts to the different profession test request To solve the interference of the strong electromagnetic field to the control circuit, and to increase the working time set, so that the test product reaches the accurate test time.

Performance Data Sheet

Sine force (peak)30kN
Shock force (peak)60 kN
Frequency range5~2,600 Hz
Displacement (continuous)100 mm
Max. Velocity1.8 m/s
Max. Acceleration75 G
Armature Diameter445 mm
1st order resonant frequency2,400 Hz
Allowable eccentric moment>500 Nxm
Armature weight40 kg
HE/ST screw dimensionM10 (metric)
Axial vibration isolation frequency<3 Hz
Max. Payload500 kg
Magnetic flux leakage≤1 mT
Dimensions (L×W×H, unpacked)1,330x860x1,250 mm
Weight (unpacked)2,500 kg
InstallationRubber mat (anchor bolts required)
Power Amplifier
Amplifier output30 kVA
SNR>65 dB
Rated output voltage120 Vrms
Amplifier efficiency> 90%
Dimensions (L×W×H, unpacked)800x900x2,100 mm
Weight (unpacked)500 kg
Air volume0.46 m3/s
Power7.5 kW
Air duct diameter200 mm
Air pressure8.8kPa
InstallationAble to connect to ceiling (up to two 90 degree bends), max 20’ run
Horizontal Slip Table
Dimensions600x600 mm
Thickness45 mm
Frequency limit2,000 Hz
Effective mass54 kg


1. High pressure oil-film bearing is used for better uniformity.

Vibration Controller and Accelerometer
Vibration Controller VT-9008-44 Channel Vibration Controller with Sine and Self Calibration.
Accelerometer EA-YD-181100mV/g, Range: 50g, Working Freq.: 1-10kHz, Weight: 11gram, with 10ft low noise cable
Other supported functions/accessories
Environmental chambersSupported
Mobile devicesCustomizable
Insulation boardsCustomizable
Working environment of the system
Temperature range0-40℃
Humidity range0~90% , no condensation
Power requirements380V/3ph/50Hz, 40kVA
Compressed air pressure0.6 Mpa

Block Diagram

Shaker Body with Slip Table

Power Amplifier and Blower

Dimensions for reference only

How to use
1. The control manual to complete the procedure
2. Such as Operation error so that can not work, you can use the recovery method of the steps of the input, and then set a single group or other running steps.
3. Before use to press the external start switch, appears COO namely lets go, opens the key.
4. Taiwan Body:
1) The table body foot sleeve as far as possible fixed
2) power supply on/work in the output line can not be unplugged
3) Place the level as far as possible
4) components can be changed, the line should not be changed or from the connection.
5) The Taiwan body must not be all or part of the reorganization, only according to specifications for a single component and with the original confirmation password.
5. The amplitude inside the code
1) Do not adjust too large before or after the boot
2) low-key amplitude of high amplitude modulation
3) Control Panel Amplitude Knob placed in the middle position test items: placed to focus on the main point, reduce the left flat right.
4) control Box: Can not be placed on the top or underground operation
6. Inside Code:
1) reset when running or operating incorrectly
2) Control The Reset method step, each inside code only set one time to save can
3) usually must use the internal code can not be set randomly
7. Control Box:
1) The connecting line of the body must be locked tightly after hanging
2) the vibration direction switch and the output connection line are correspondence, can not connect the wrong
8. Testing: Non-special test should use full wave test
9. The Taiwan body: can not produce the collision sound, the upper and lower center axis mutual touch will cause the spring steel piece rupture to be immediately shut down, amplitude modulation is adjusted small then turns on.
10. Other unknown:Do not arbitrarily change internal components and lines
11. The reason is bad:
1) The use of computer models can not be used for shaking table control
2) can not reload the driver
3) for the Ista-ia test, the operator to protect the sample, to prevent the test pieces slide out of the table;
4) gear gearbox replacement regularly;
5) Cut off all power when not working, keep clean; 5, non-staff can not operate at will;

Product Tags:

electrodynamic vibration test systems


electrodynamic vibration system

 Electrodynamics Vibration Test System / Vibration Shaker Table High Frequency Vertical And Horizontal Manufactures

Electrodynamics Vibration Test System / Vibration Shaker Table High Frequency Vertical And Horizontal Images

Inquiry Cart 0
Send your message to this supplier
*To: Dongguan Haida Equipment Co.,LTD
Characters Remaining: (0/3000)